GET RAREFILE PREMIUM

For VIP Members Only

ARCHIVES

RSS Feed

GUIDELINES Please Read

ALLYOULIKE CHATBOX

Download Rosetta Stone


Mar 10

Ableton Live 9 Suite v9.7.1

ableton live

Create, produce and perform. Create ideas, make changes without stopping, and capture everything as you work. If you’ve used music software before, you’re already familiar with one half of Ableton Live. Live’s Arrangement View is a familiar working space: time moves from left to right, while tracks are stacked vertically. But Live also features the revolutionary Session View: a uniquesketchpad for improvising, playing and performing with musical ideas, without the constraints of the timeline.

Freely and independently start and stop any number of audio or MIDI loops – everything stays in sync. Almost everything in Live works in real-time – add, reorder or remove devices, play with Live’s flexible track routing and more all without interrupting your creative flow.

Ableton Live 9 new features
* Session automation: In Session View, automation can now be recorded in real time directly within clips. Automation can move together with clips between Arrangement and Session View.
* Find sounds fast: Live’s new browser puts all instruments, effects, samples, and plug-ins in one easy-to-navigate view. Drag and drop folders from anywhere on your computer, search as you type and navigate from the keyboard to find everything quickly.
* Discover new sounds: Live comes with a large selection (3,500 in the Suite edition) of production-ready sounds, which were carefully crafted with the help of over 40 artists, sound designers and engineers. All sounds feature Macro controls for fast access to their most meaningful, musical parameters.
* Get your sound right: Live’s studio effects have all been reworked for even better sound and usability. The Glue Compressor is a new effect – an authentic model of a legendary 1980s console bus compressor. EQ Eight has an audition mode for isolating frequencies and an expandable spectrum display. The Gate and Compressor effects feature a Gain Reduction view which shows changes in signal level over time.
* Extract music from samples: Live’s new Harmony, Melody and Drums To Midi tools extract natural-feeling MIDI directly from the favourite parts of your music collection. You can also sing, tap a rhythm, play any solo instrument, then use Melody or Drums to MIDI to turn your recordings into MIDI clips that you can edit and reuse with any sound.
* Edit the details: Transpose, reverse and stretch MIDI notes or warp clip automation and add curves to automation envelopes. New tools and an improved workflow allow fast and flexible editing of musical ideas.
* Max for Live – now in Suite: The Suite edition of Live 9 comes with Max for Live and its many unique instruments, effects and tools. Max for Live itself includes 24 new devices such as a convolution reverb, new drum synthesizer instruments, MIDI echo as well as reworked versions of classics such as Step Sequencer and Buffer Shuffler 2.

What’s new in Ableton Live 9.6.2:
Improvements and feature changes:
* The ‘Link’ icon in Live’s main UI now behaves like a button, toggling the Link feature on and off. This button only appears if Link is enabled in the Preferences.
* The ‘EXT’ button is no longer hidden when the Link button is shown.
* Enabling the ‘Link’ toggle disables ‘EXT’ and vice versa. Loading a new Set disables Link.
* Improved the responsiveness of the Tuner device.
* Updated the Live manual and a number of lessons and info texts.

Bugfixes:
* Fixed a bug which caused Live to hang when loading certain Live Sets.
* When duplicating a track, Clip modulation would not play back for the newly created track.
* When triggering a recording with count-in enabled, Simpler could start playing back Warped samples from the wrong position.
* Live could crash when loading a Live Set where the ‘EXT’ button is saved as active, if Link was enabled in the preferences.
* Fixed a rare crash which could occur when using Complex or Pro Warp modes.
* If the End Marker of a Clip preceded the Loop End Marker and Clip Loop was on, recording this Clip in arrangement could lead to a wrong result.
* Operator’s ‘Shaper Drive’ and ‘Shaper Dry/Wet’ would expose the wrong parameter name when mapped to Macros.
* Vinyl Distortion would not report its latency to Live, thus would not be correctly compensated.
* Fixed a bug in Max for Live which prevented ‘fold_state’ and devices in Drum Rack Chains from being declared.
* The APC 40 Session Ring would reset to the top left of Live’s Session View when adding or removing another Control Surface.
* The Session Ring would be displayed when selecting certain Control Surfaces, even if no valid input and output MIDI ports were enabled in the respective Control Surfaces menus.
* The Launchpad Pro User mode would not send MIDI notes into tracks anymore.

Changes for Push:
* Push 2 Firmware update v 0.51: introduces an improvement for potentiometers, to prevent jitter due to electrical noise.
* In Session mode, holding duplicate allows copying and pasting a Clip to a Clip Slot of choice.
* In the melodic step sequencer, stepped automation is now linked to note length.
* It is now possible to convert an audio clip to a new drum rack pad on Push 2.
* When converting an audio Clip to Simpler, the device chain content is now copied from the original track to the destination track.
* In the Drum Rack Step Sequencer, it is now possible to copy and paste a step into a different part of the Clip for Push 1 and 2.
* It is now possible to copy and paste notes across pitches in the Melodic Step Sequencer for Push 1 and 2.
* When Simpler is in One Shot mode, the ‘Gain’ parameter is now available in place of Volume.
* In both the melodic and Drum Rack step sequencer, note length can now be adjusted via the pads, by holding the pad where the step exists, and one pad at its right.
* When moving the Session Ring with the ‘Page’ and ‘Octave’ buttons from Push 2, an absolute offset of 8 will now be used in all cases.
* Scales Layout settings are now also stored within a Live Set.
* When using Simpler in Slicing mode, holding ‘Delete’ and pressing a Slice will remove all its steps in the currently selected Clip, if any exist.
* In addition to that, holding ‘Quantize’ and pressing a Slice will quantize all the events for that Slice.
* When cycling through Layouts with Push 2, a notification is now declaring the current mode of operation of the pads.
* Count-in would be ignored when a recording was triggered via Push, in cases where a Clip was already active.
* Previously, ‘Fixed Length’ would be ignored if the recording of a Clip was triggered by pressing a pad as opposed to pressing the Record button.
* Under certain circumstances, the Push 2 display could go blank when selecting a track containing Simpler, if a really long sample was loaded into that device.
* Disabling ‘Warp’ would cause the zoom in Simpler to jump to an unusual zoom level on the Push 2 display.
* The master meter on Push 2 would not turn entirely red, as it does in Live, when the signal was clipping.
* Display brightness settings would not be restored correctly on Push 2 after power cycling the device.
* When a Group Track is selected, using ‘Add Track’ to add an instrument would lead to unexpected results.
* If ‘Accent’ was enabled, changing any of the Note Settings in the step sequencer would cause the velocity for this step to jump to 127.
* When dragging a sample from an audio track into Simpler from Live, Push 2 would erroneously still display the audio Clip view, even if the track containing Simpler was selected.
* After a Drum Rack pad containing Simpler is selected, Device Mode would still display its controls upon selecting a different track.
* When Simpler was set to Slicing mode and its Playback Mode was ‘Mono’, ‘Repeat’ would not behave correctly.
* Under certain circumstances, the ‘Convert’ button was not available for audio Clips.
* When controlling Multiband Compressor with Push 1, the ‘Below Threshold’ parameter would not be available anymore for the Mid Band.
* When browsing the Drums category, the empty Drum Rack icon would incorrectly display as a folder.

http://www.rarefile.net/4wzsmpsvw45b/AbletonLive.9.7.1.part1.rar
http://www.rarefile.net/b92cfv5u0cjm/AbletonLive.9.7.1.part2.rar
http://www.rarefile.net/m0ej3h72vqc5/AbletonLive.9.7.1.part3.rar
http://www.rarefile.net/j3ihz3gzjwha/AbletonLive.9.7.1.part4.rar
.

GOOD NEWS for FREE & PREMIUM Rarefile Users!
YOU CAN NOW DOWNLOAD FILES
UP TO 3GB PER FILE!
Please read the announcement on the front page.

12 Responses to this entry.

1.Rob Says:
March 10th, 2017 at 7:03 am

REUP! please

2.maxdugan Says:
March 10th, 2017 at 7:46 am

Hello Rob, a newer version is now posted, thank you very much

3.Rob Says:
March 14th, 2017 at 8:47 am

thank you!

4.maxdugan Says:
March 14th, 2017 at 6:33 pm

Thank you too Rob

5.Rayado Says:
March 16th, 2017 at 5:52 am

Thanks for this one….Any news about the Universal Audio plugins bundle?

6.Megastar Says:
May 17th, 2017 at 9:30 pm

Hiya Max-i-mus,

hope alls well in your neck of the woods, sons into mixing music on his Apple Mac, any chance you could get

Atomix VirtualDJ Pro
Serato DJ
Ableton Live
Native Instruments Traktor Pro

if at all possible when you have time.

thanking you kindly in advance 😉

7.maxdugan Says:
May 17th, 2017 at 9:52 pm

Hello Megastar, let me check them out for you, thank you very much

8.morphogen Says:
March 31st, 2018 at 5:24 am

you wont need atomix vdj or serato and traktor there all the samr type of program just use traktor or serato.

Leave a Reply

HOW TO SEARCH

GET RAREFILE PREMIUM NOW

UPDATES AND TIDBITS

Download the Latest IDM

HOW TO USE IDM

5-Stars Posts of ALLYOULIKE

POPULAR POSTS

HJSPLIT & 7-ZIP Download

Download K-LITE CODEC

Download JDOWNLOADER

Download WINRAR